An empty SD card (formatted to FAT32 with at least 2 GB of memory and no more than 32 GB of memory)
Computer with SD card slot
Google Chrome browser (using Internet Explorer or safari to download these files can cause complications with this process)
First start by downloading the firmware files. You can download the firmware by clicking each file individually.
File 1 (AML script)
File 2 (2.1.1 Firmware file)
File 3 (Recovery Image)
Once you have downloaded the three files, you will copy and paste them onto your empty SD card.
(there must be no other files on the SD card, and the zipped files must remain zipped)
- After you have placed the three files onto your SD card, you will begin the toothpick method.
Disconnect power from G-box Q².
Insert SD card with firmware files into card slot on the side of your G-box Q².
Insert toothpick or similar object into "reset" hole on the back of your G-box Q², until you feel a click.
Once you feel the click of the reset button, Hold it down with toothpick while reconnecting the power to your G-box Q².
(you will hold this down for roughly 20-30 seconds or until you see your screen change.)